fbpx
Back

Please enter your username or email address.
You will receive a link to create a new password via email.

HIPERFIRE Introduces Two-Stage AR Trigger Line

HIPERTOUCH has created a new family of two-stage triggers the X2S line. Using the company’s Cam-Over Toggle Engine and Radical Sear Mechanics technologies allow for reduced pull weights over mil-spec without sacrificing critical hammer energy. This system also contributes to our Soft Start Lock-Up that reduces rifle “flinch” after the break. Precision machining, heat treatment, and coating come together in mil-tough components that are designed for the harshest of environments. All of this in user-adjustable 3-4 ½ pound pull ranges.

To learn about the technology in these triggers watch the video below. 

One of the main arguments for two-stage triggers is the added level of control in high-stress environments. Many users with special operations and defensive training backgrounds suggest that the ability to “prep” the trigger on the second stage wall during high adrenaline situations gives them the confidence to control their shots and ensure they are shooting only at their intended target.

HIPERFIRE X2S MOD-1

The MOD-1 design has a longer first stage than MOD-2 or MOD-3 for a more defined first stage prep, but shares the same curved bow and Maganese Phosphate coating as the MOD-2 design.

  • Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy
  • Soft Start Lock-Up aids in eliminating rifle “flinch” after the break for more accurate shots at distance
  • Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes
  • Tactile Weightless Break means there is no mushy over-travel after the break
  • Curved trigger bow allows for the addition of our patented HIPERSHOE (sold separately)
  • The first stage is slightly longer than its MOD-2 and MOD-3 counterparts for a more defined first stage “prep”
  • MSRP $200
HIPERFIRE X2S MOD-1
HIPERFIRE X2S MOD-1
  • Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX)
  • 1st Stage: Short, 2-2 1/2 pound pull with green or red springs respectively
  • 2nd Stage: Minimal “wall”, +1 1/2 pounds with either green or red springs
  • Total Pull Weight: 3 1/2 – 4 pounds with green or red springs respectively

HIPERFIRE X2S MOD-2

The MOD-2 design has a shorter first stage than MOD-1 for a faster first stage prep. It shares the same sear geometry and performance as its MOD-3 counterpart but has a curved trigger bow and a standard Maganese Phosphate coating.

  • Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy
  • Soft Start Lock-Up aids in eliminating rifle “flinch” after the break for more accurate shots at distance
  • Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes
  • Tactile Weightless Break means there is no mushy over-travel after the break
  • Curved trigger bow allows for the addition of our patented HIPERSHOE (sold separately)
  • First stage slightly shorter than the MOD-1 design
  • Same sear design as its MOD-3 counterpart, but curved trigger bow with standard Maganese Phosphate coating
  • Distinct wall between first and second stages allows for effective “prepping” of the trigger for added control
  • MSRP $200
HIPERFIRE X2S MOD-2
HIPERFIRE X2S MOD-2
  • Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX)
  • Trigger Type: Two-Stage, Semi-Drop-In
  • 1st Stage: Minimal, 2 – 3 pound pull with green or red springs respectively
  • 2nd Stage: Minimal “wall”, +1 1/2 pounds with either green or red springs
  • Total Pull Weight: 3 1/2 – 4 1/2 pounds with green or red springs respectively

HIPERFIRE X2S MOD-3

The MOD-3 design has a shorter first stage than MOD-1 for a faster first stage prep. It shares the same sear geometry and performance as its MOD-2 counterpart but has a flat trigger bow with our patented HIPERSHOE® and an upgraded Black Nitride coating.

This trigger can be used with or without the included HIPERSHOE.

  • Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy
  • Soft Start Lock-Up aids in eliminating rifle “flinch” after the break for more accurate shots at distance
  • Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes
  • Tactile Weightless Break means there is no mushy over-travel after the break
  • Flat trigger bow
  • HIPERSHOE finger pad reduces the perceived trigger pull weight for a lighter feel
  • First stage slightly shorter than the MOD-1 design
  • Same sear design as its MOD-2 counterpart, but a flat trigger bow with upgraded Black Nitride coating
  • Distinct wall between first and second stages allows for effective “prepping” of the trigger for added control
  • MSRP $225
HIPERFIRE X2S MOD-3
  • Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX)
  • Trigger Type: Two-Stage, Semi-Drop-In
  • 1st Stage: Minimal, 2 – 3 pound pull with green or red springs respectively
  • 2nd Stage: Minimal “wall”, +1 1/2 pounds with either green or red springs
  • Total Pull Weight: 3 1/2 – 4 1/2 pounds with green or red springs respectively
  • Trigger Bow: Flat with HIPERSHOE included
Loading more posts ...